The Vishay Semiconductors VBUS05M2-HT5 provides transient protection for data lines as per IEC 61000-4-2 at ± 20 kV (air and contact discharge). It also supports automated optical inspection (AOI) for automotive systems. It has a breakdown voltage of 8.5V typical at 1mA and a maximum clamping voltage of 18V at 3.4A. Its moisture sensitivity level (MSL) of 1 is in accordance with J-STD-020 and it earned a UL 94 V-0 flammability rating. The high ESD immunity and a very low capacitance makes it usable for high frequency applications like USB2.0, USB3.0 or HDMI. With the VBUS05M2-HT5 two high speed data lines can be protected against transient voltage signals like ESD. Connected to the data line (pin 1 and pin 2) and to ground (pin 3) negative transients will be clamped close above the 5.5 V working range. This new Vishay Semiconductors’ solution saves space over solutions in SOT packages and provides protection of high speed data lines against transient voltage signals. Vishay’s device offers low capacitance for the protection of high-speed data lines against transient voltage signals. Measuring only 1mm by 1.1mm with a very low height of 0.45mm it requires less board space than similar devices. New Yorker Electronics supplies Vishay Siliconix low-voltage power MOSFETs (metal-oxide semiconductor field-effect transistors), Power ICs and analog switches and multiplexers. Vishay Siliconix product portfolio now also features high-voltage planar MOSFETs acquired from International Rectifier. Features &
Benefits: Interface Protection Applications: Data Sheet: |